Category Archives: Cyclops Submersible Sensors

Effective April 1, 2017, Cyclops-7F replaces Cyclops-7 Submersible Sensors. Cyclops-7F requires only 1 second after power up before taking measurements. As the Cyclops-7 required 5 seconds, this is a significant reduction in power required, especially if repeatedly power cycling the sensor. All … Continue reading

Posted in Cyclops Submersible Sensors | Comments Off

We now sell a Chlorophyll Standard Solution (PN 2100-320) for direct concentration calibration of our Cyclops-7 Chlorophyll Fluorometers. This standard represents an equivalent chlorophyll concentration of 40µg/L which can be used to convert the sensor’s voltage response to concentration units enabling … Continue reading

Posted in Cyclops Submersible Sensors | Comments Off

Due to material obsolescence we are no longer able to repair Cyclops-7 with serial numbers prior to 2100455 and AquaFluors with serial numbers prior to 800430. We hope you had many years of good use from your instruments and will consider … Continue reading

Posted in AquaFluor Handheld Fluorometer/Turbidimeter, Cyclops Submersible Sensors | Comments Off

Multi-parameter water quality sondes are amazing for monitoring the health of lakes or rivers when they’re mounted on buoys. But sometimes a research project doesn’t need all that data, or the cost that goes with it. Fortunately there is an … Continue reading

Posted in Cyclops Submersible Sensors | Comments Off

Turner Designs recently concluded in-depth testing of AML’s Cabled UV.  Upon Cabled UV’s 2014 release, we recognized the advantages the product would bring to the use of our fluorometers.  Testing with  Cyclops-7 sensors showed the Cabled UV did not interfere … Continue reading

Posted in Cyclops Submersible Sensors | Tagged | Comments Off

The Cyclops-7 Logger offered by PME (www.pme.com) can now be controlled using an Android phone.  This app developed by PME allows control of any of their USB loggers and has data offload capabilities.  Additionally, the app enables customers to check … Continue reading

Posted in Cyclops Submersible Sensors | Tagged | Comments Off

Using submersible fluorometry as part of a Manta 2 probe for cyanobacterial monitoring >>Read case study Blog this! Bookmark on Delicious Digg this post Recommend on Facebook Share on Linkedin Share via MySpace share via Reddit Share with Stumblers Share … Continue reading

Posted in Cyclops Submersible Sensors | Tagged , , , , , , , | Comments Off

Various upgrades have been implemented to the Cyclops-7 Logger. Users no longer need to extract the SD card, use an RS232 converter and install drivers as there is now a simple USB interface. The updated software and user interface allow … Continue reading

Posted in Cyclops Submersible Sensors | Tagged , , | Comments Off

Nice poster at IAGLR using our C6 with turbidity, CDOM, phycocyanin and chlorophyll sensors.  >>View here Blog this! Bookmark on Delicious Digg this post Recommend on Facebook Share on Linkedin Share via MySpace share via Reddit Share with Stumblers Share … Continue reading

Posted in C6 Multi-Sensor Platform, Cyclops Submersible Sensors | Comments Off

The microbial contamination of waterways by fecal microbes, and specifically, pathogenic  microbes, presents a major problem in the United States and worldwide. The World Health Organization (WHO) estimates that diarrheal diseases account for 1.8 million of the 3.1 million water-related … Continue reading

Posted in Cyclops Submersible Sensors | Tagged , , , , , | Comments Off